i think you'd be screwed if you mess up on denim, but it's hard to mess up when doing lyrics(unless your trying to do special letters), so just think about what youre writing and dont spell it wrong

[QUOTE=RANCIDandACDC]does any body know the tabs to "doichie girls" by: ADAM and the ANTS
I cant find them anywhere[/QUOTE]

you wont find it anywhere. Your just gonna have to work it out by ear. Great song though.

Whoo, I just got a denim jacket so I can start on making it super PUNX. By that, I mean putting on over 100 pounds of studs and writing OI OI OI on the sleeves.

My old CD case

[url]http://www.musicianforums.com/forums/attachment.php?attachmentid=15373&stc=1[/url]

[url]http://www.musicianforums.com/forums/attachment.php?attachmentid=15374&stc=1[/url]

[QUOTE=Flagjacket]Whoo, I just got a denim jacket so I can start on making it super PUNX. By that, I mean putting on over 100 pounds of studs and writing OI OI OI on the sleeves.[/QUOTE]

Sleeves aren't punk.

Uh, did I say sleeves? I mean uh..... upper back, and I'm tearing the sleeves off.

[QUOTE=Brain Squirmin' Like a Toad]Sleeves aren't punk.[/QUOTE]
unless they aren't attached to a shirt. i'm not sure how you'd pull that off.

but it would rule.

[QUOTE=cheeser_1]unless they aren't attached to a shirt. i'm not sure how you'd pull that off.

but it would rule.[/QUOTE]
Duct tape.

Fishing line. Sew it right to your arms.

[QUOTE=Anarcho Poser]Fishing line. Sew it right to your arms.[/QUOTE]
interesting... would this work?



i mean, i'm not considering it. but i mean, fishing line, you can sew it into skin and it will hold? i figure i may one day need to sew something into skin, right, so i thought i should ask if this works.

[QUOTE=Flagjacket]Duct tape.[/QUOTE]
Punx
[QUOTE=Anarcho Poser]Fishing line. Sew it right to your arms.[/QUOTE]
Punxer
[QUOTE=cheeser_1]interesting... would this work?



i mean, i'm not considering it. but i mean, fishing line, you can sew it into skin and it will hold? i figure i may one day need to sew something into skin, right, so i thought i should ask if this works.[/QUOTE]
It would hold like stiches, I think it's the same consistancy, except it wouldn't dissolve like most modern sutures.

[QUOTE=Brain Squirmin' Like a Toad]It would hold like stiches, I think it's the same consistancy, except it wouldn't dissolve like most modern sutures.[/QUOTE]good to know. maybe i'll make a suit out of ladies' skin. :)

[QUOTE=cheeser_1]good to know. maybe i'll make a suit out of ladies' skin. :)[/QUOTE]

Ok Mr. Gein

sleeves aren't punk :lol:
thats right

my jacket has sleeves :upset:

*rips sleevs off*


Other than studsandspikes.com is there any where (not online) that i can get studs for my jacket ... I.v looked in fabric stors but no luck

[url]www.crustpunks.com[/url] and [url]www.angryyoungandpoor.com[/url] have good selections

well it sorta depends on where you live.

He asked where not online, though.

There's a vintage clothes store where I live that I think sells spikes and studs. Never really looked into it, though, so I don't know. It all depends on where you live. You're probably better off getting stuff from online.

oh duh. i read it wrong sorry

i'd go with what they said^^

if you want a bullet belt, you can buy one from havoc records. not sure if they're cheaper or not, compared to other places. i haven't worked it out. too lazy.

[QUOTE=cheeser_1]if you want a bullet belt, you can buy one from havoc records. not sure if they're cheaper or not, compared to other places. i haven't worked it out. too lazy.[/QUOTE]


I'd guess Army Surplus stores are cheapest.

[QUOTE=me likes punk][url]www.crustpunks.com[/url] and [/QUOTE]
:lol: that site makes me laugh.

I think I'm going to stencil the Public Enemy logo on a pair of jeans.

[QUOTE=Major General Despair]I'd guess Army Surplus stores are cheapest.[/QUOTE]
they sell those at army surplus? i'd have figured they wouldn't have them surplus from the army unless they were active (and thus illegal to just sell like that).

[QUOTE=cheeser_1]they sell those at army surplus? i'd have figured they wouldn't have them surplus from the army unless they were active (and thus illegal to just sell like that).[/QUOTE]

i can get .303 un-active bullets from my local army surplus.
they just empty out the active ons i think but the .303's are probably just empty shells picked up from WW2 battlefields

I've seen unactive bullets at the surplus store here. People use them for collections, displays, decorations, etc. I think there was a few at the gun show I went to, but those things f'ucking scare me.

I bleached a denim jacket today to lghten it up but it turned out alot different than i expected. i like the way it turned out.

[url]http://photobucket.com/albums/y213/jimj865975/?action=view&current=05-08-20231328.jpg[/url]

(sorry bad quality photo)

Pretty slammin.

i think it looks good.

I made a Fugazi shirt today...

[QUOTE=alkalinesk8er]I made a Fugazi shirt today...[/QUOTE]
Post pics, otherwise I don't care.

[QUOTE=Theramed]I bleached a denim jacket today to lghten it up but it turned out alot different than i expected. i like the way it turned out.

[url]http://photobucket.com/albums/y213/jimj865975/?action=view&current=05-08-20231328.jpg[/url]

(sorry bad quality photo)[/QUOTE]
I like it.

[QUOTE=Anarcho Poser]Post pics, otherwise I don't care.[/QUOTE]

I will tommarow. It looks really good.

studs i didnt find any and i spent the entire day in the city but what ever
i saw something about bullet belts and bullets just get out of the city and find some where with bullet holes in sighns and look around at the bottem of them and therell be a lot of empty shells for free to take... i have lots from working on my grandpearents farm ...

in the city as in...NYC?

Do you think it's safe to put posterboard through my printer? I want to do this so that I can cut a stencil directly rather than printing out the stencil on paper and having to tape it to posterboard and then cut.

you can set your printer to print out thick paper, but it's still risky. i'd just draw the picture on posterboard.

Meh, I tried it and it worked.

[QUOTE=RudeBoyStompin]Do you think it's safe to put posterboard through my printer? I want to do this so that I can cut a stencil directly rather than printing out the stencil on paper and having to tape it to posterboard and then cut.[/QUOTE]
I've done it before, it works. But the ink stays wet for a long *** time so watch out for that. :thumb:

[url]http://img369.imageshack.us/img369/316/pestencil6jk.jpg[/url]

Looks like the stencil came out pretty good, hope the finished product does as well.