![]() |
[QUOTE=Evanw]yes but, you forgot about bar codes. every item is registered and it says the item skew on the recipt.[/QUOTE]
not all SKUs are per-item. and not all receipts have SKUs, do they? |
ok DIY right? how bout pircings?? I was sitting around, and realized I didnt have a single pircing, and I was like "hey im anti-comformist", but then I was like "maybe I'm just a *****". So I tried to pirce my belly button using a safety pin (shut up) I got it through, it was sticking out the out other side, but it wouldnt go any farther. I wasnt strong enough to push it through. Any tips??
|
*****=p.ussy
|
Tip: I wouldn't try any piercing besides your ears yourself.
I'm pretty sure if you do your belly button wrong you can cause internal bleeding... |
ok well where ever, how would I go about piercing? Is it necesary to have a cork or apple or whatever behind it? Can you clean it with peroxide?
|
Iv known many people who did their own belly butten.. and they all got infected then died. You could do your eyebrow just pull out the skin then put whatever your useing thru.
|
there are things you can by to clean piercings, peroxide (to my knowledge) is not the best, and is actaully bad for facial piercings (which is not what you are talking about, i know). i'm also pretty sure that if you don't want to purchase this cleaning solution, (mild) salt water works okay.
safety pins are not the best for piercing with. unless you're using a very high (ie thin) gauge ring/bar/whatever you put in it, you're way better off using a hollow pointed needle. which means it will take a chunk out of ya, but that's the point. but that's also much harder to do yourself, and unless you think about it ahead of time, it's hard to get ahold of one. the actual piercing part, there are two ways to go about it, i suppose, and i don't know that either is necessarily better. you can just jab, really fast, and go straight through in one shove. it's fast, at least. or you could push it through slowly, which is a bit more controlled, but of course, very slow and less forceful. i recommend the first method for places where the skin is hard to go through or if you're using a hollow point needle. in your case though (unless your belly button is like, really tough skin), i'd say going slow would work fine, but you've still gotta get it through. if you have anything like a cork, useless book, big eraser, or anything else hard that can absorb a safety pin jab and you won't get upset if it does(ie do not use a kitten, jello, piece of pie, etc), use that. just hold it on the end you're piercing out of, and push through into that. i'm not sure how you do it with the belly button (just stick it in there, i guess, if you're an innie). you have to make sure you pierce deep enough that it won't surface (important for things like eyebrows and stuff). so be sure you aren't just going through some outer layers of skin, because the ring will just move its way out, and you'll have a stupid looking scar usually. and for the record, belly button piercings are not categorically non-conformist (i would say quite the opposite). but then again, we can be sure someone who "punches cops" is way too punk rock for all of us. :lol: |
lol I know my name is gay, I was doing it to make fun of myself really. It's so sterio-typical to think of punks as people who would punch a cop, but I actually did it (he deserved it) and it felt really good and I don't think I've ever run that fast in my life.
(I was saying not having any piercings was non-conformist) |
[QUOTE=IxPunchxCops]lol I know my name is gay, [/QUOTE]
no, it's not. it's stupid. |
[QUOTE=cheeser_1]no, it's not. it's stupid.[/QUOTE]
yeah to have a gay name it would be somethng like "i bum boys" or something like that. I cant complain, im named after a marilyn manson song :upset: |
ok, so I know my name is stupid, sorry for not being pc. but it still wouldn't be gay if my name was I bum boys, although I'm not sure I could, cuz I'm a girl...
strap ons |
loser
|
[QUOTE=IxPunchxCops]lol I know my name is gay[/QUOTE]
How could a name be homosexual |
[QUOTE=IxPunchxCops]lol I know my name is gay, I was doing it to make fun of myself really. It's so sterio-typical to think of punks as people who would punch a cop, but I actually did it (he deserved it) and it felt really good and I don't think I've ever run that fast in my life.
(I was saying not having any piercings was non-conformist)[/QUOTE] i hate you, shut your [b]f[/b]ucking mouth and use your [b]f[/b]ucking brain |
[QUOTE=IxPunchxCops]ok, so I know my name is stupid, sorry for not being pc.[/QUOTE]
what, "pc" stands for "stupid"? or "someone who doesn't own a dictionary"? |
oh and cheeser, i punch cops, and clash hooligan, stop talking about peircing, you know NOTHING
|
[QUOTE=RevengeOfTheVillageIdiot]oh and cheeser, i punch cops, and clash hooligan, stop talking about peircing, you know NOTHING[/QUOTE]
thanks socrates. any other philisophical delights you wanna throw this way? note: if you didn't get that joke, go read a book or something. |
cheeser, you're not funny. dont offer bad advice on a topic you dont know about
would you like to know that hollow needles dont remove skin? |
[QUOTE=MILF Hunter]How could a name be homosexual[/QUOTE]
I say that to chaps in my school and they called me a fag. But then I show them my girlfriend and I call them morons. I love my school. :) |
[QUOTE=Ihatehate]I say that to chaps in my school and they called me a fag. But then I show them my girlfriend and I call them morons. I love my school. :)[/QUOTE]
i have this funny image in my head where they call you "fag" and you pull your 6 inch tall girlfriend out of your pocket or something. and village idiot, don't lecture me, i've pierced myself before with and without hollow points, i know the difference, the hollow point for me most certainly took out a chunk of skin or flesh or whatever it was. maybe im' so punk rawk that i used a needle that was too wide. does that make me cool? do i care? no. eat it. |
No, we all conversed with my girlfriend.
Cheeser you could have done better. |
My friend has a prince albert would this be dangerous to do on your own?
|
[QUOTE=XpunksXdeadX]My friend has a prince albert would this be dangerous to do on your own?[/QUOTE]
Not at all. Try it for yourself. |
[QUOTE=XpunksXdeadX]My friend has a prince albert would this be dangerous to do on your own?[/QUOTE]
i have prince albert in a can. actually, i used to, it was in my refridgerator, but it started running, and i couldn't catch it. so now i guess i don't have any. |
[QUOTE=cheeser_1]i have prince albert in a can. actually, i used to, it was in my refridgerator, but it started running, and i couldn't catch it. so now i guess i don't have any.[/QUOTE]
that was stupid.... |
[QUOTE=XpunksXdeadX]My friend has a prince albert would this be dangerous to do on your own?[/QUOTE]
ow ow ow ow ow ow ow ow ow ow ow ow ow ow ow ow |
[QUOTE=clash_hooligans]that was stupid....[/QUOTE]
i know |
[QUOTE=cheeser_1]i have this funny image in my head where they call you "fag" and you pull your 6 inch tall girlfriend out of your pocket or something.
and village idiot, don't lecture me, i've pierced myself before with and without hollow points, i know the difference, the hollow point for me most certainly took out a chunk of skin or flesh or whatever it was. maybe im' so punk rawk that i used a needle that was too wide. does that make me cool? do i care? no. eat it.[/QUOTE] well, you are wrong, ive pierced myself plenty of times, and been peirced by others the only time a needle removes anything is if you twist it, which is a rediculous thing to do, or you use a MASSIVE needle. needles cut a cresent, then the shaft opens it up or are you just gonna keep saying you're right? |
[QUOTE=Brain Squirmin' Like a Toad]Not at all. Try it for yourself.[/QUOTE]
hahaha. don't forget the ladder. that's only fun when you do it yourself |
whats the best way to hold up a hawk??
no I'm just kidding does anyone know what a good program would be to edit and record music?? |
| All times are GMT -6. The time now is 12:12 PM. |
Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.