Fixing Stripped Screwholes
i found this on the internet and it helped me with fixing my stripped screwholes.
Supplies- Glue (not super glue), flat edge toothpick
1. remove screw
2. put glue on the end of the flat edge toothpick, insert the toothpick into the screw hole.
3. break the end of the toothpick (with the glue on it) off in the hole.
4 let the glue dry, when the glue dries, screw the screw back into the hole. it just hold tight.
Last edited by wileycoyote; 08-10-2005 at 07:09 PM.
|