Sputnik Music Forums - View Single Post - Casual

FunkMetalBass · 07-06-2012, 11:18 AM

Turns out I was a bit sloppy with that bass I mocked up. The bridge string spacing was supposed to be somewhere around 16.5/17mm, but instead ended up just shy of 20mm. I now have to decide whether to leave it as is and try to correct the mistake on my trace before I fully cut the neck, or if I should painstakingly make all of the autocad adjustments.

What do you guys think?

In playing around with AutoCad, I don't think it's going to make a difference. Spread over the neck, it's mere millimeters, so I'm just going to ignore it and shape it exactly as I already have it.

07-06-2012, 11:18 AM	#16465
FunkMetalBass GrandMaster FunkMetal Join Date: Oct 2003 Location: Phoenix, Arizona, USA Arrests: More than Ryan Posts: 14,599	Turns out I was a bit sloppy with that bass I mocked up. The bridge string spacing was supposed to be somewhere around 16.5/17mm, but instead ended up just shy of 20mm. I now have to decide whether to leave it as is and try to correct the mistake on my trace before I fully cut the neck, or if I should painstakingly make all of the autocad adjustments. What do you guys think? In playing around with AutoCad, I don't think it's going to make a difference. Spread over the neck, it's mere millimeters, so I'm just going to ignore it and shape it exactly as I already have it. Last edited by FunkMetalBass; 07-06-2012 at 12:02 PM.