[LewsTherin]

Okay guys, so far this is only woods. I will try to add at least two (2) woods a day until the list is fairly complete.

I will also get to:

-Planning/designing an instrument
---Getting exactly what you want in an instrument
-Making the shift from small-scale paper plans to full-size plans
-Getting your design into/onto wood
---Preparing wood to be made into an instrument
---Tools

-Use of composites (maybe)
-Milling/manufacturing parts (some stuff)

I will most likely be leaving the electronics parts out, there are plenty of threads out there about this subject matter already.

Oh, and guys, mind not leaving posts? This will mos def be a multi-post thing from me. I will put an index in this first post as well.

Also note, I will be doing some construction this summer. I will have pictures for the tools, bass construction/design, composites, and parts manufacturing sections.

Index

[URL="http://www.sputnikmusic.com/forums/showpost.php?p=12205311&postcount=5"]Composite Neck[/url]
[URL="http://www.sputnikmusic.com/forums/showpost.php?p=12228913&postcount=7"]Composite Parts[/url]
[URL="http://www.sputnikmusic.com/forums/showpost.php?p=12260519&postcount=10"]Designing an Instrument[/url]
[URL="http://www.sputnikmusic.com/forums/showpost.php?p=12260806&postcount=11"]Making the Shift from Paper to Wood[/url]
[URL="http://www.sputnikmusic.com/forums/showpost.php?p=12269427&postcount=14"]Woods[/url]
[URL="http://www.sputnikmusic.com/forums/showpost.php?p=12306100&postcount=15"]The Workshop[/url]