pickup selector/killswitch

[t3h_m013]

I was hoping to rewire the pickup selector in my 3eq stingray 5:
its currently series-single coil-parallel, but i was hoping to change it to series-single coil-mute or mute-single coil-parrallel (preferably the first one.

I cant find any detailed schematics or wiring diagrams, and its all a bit complicated due to the preamp.

This is the schematic off the ernieball site:
http://www.ernieball.com/mmonline/techinfo/controls/cfd_stingray5.gif

anyone seen a more detailed schematic or know how to rewire it. Its too complicated to describe the wiring so i guess I'm hoping people will either have something similar or have the schematic.


Cheers in advance for any help.

[HELLonWHEELS]

killswitch is super easy you pretty just have to break apart a wire going to the output jack. I would get the pickup selector done bya pro. IMO

[t3h_m013]

i dont want a separate killswitch though, i want it combined. I'm with soldering and stuff so as long as i can work out what wires to resolder I'll be ok.
Thanks for the help though.