Re-Finishing Headstock(pics!!)

[HELLonWHEELS]

So I decided to re-finish the headstock on my Squier P-Bass. I forgot to take a picture of what it look liked before.

http://i19.photobucket.com/albums/b160/HELLonWHEELS7/DSCN0474.jpg

I just put the last coat of black on.


http://i19.photobucket.com/albums/b160/HELLonWHEELS7/DSCN0492.jpg
http://i19.photobucket.com/albums/b160/HELLonWHEELS7/DSCN0493.jpg



Just testing out to see what the pinstripes are going to look like. I haven't decided on a specific design yet, but i think im just going to outline the headstock. Should look sweet!

http://i19.photobucket.com/albums/b160/HELLonWHEELS7/DSCN0494.jpg


After i do the pinstriping Im going to put a coats of polyurathane gloss and then it should be done. An ideas for pinstriping will be listened too. Thanks

Brandon

[herrly]

I don't think it'd look right if you pinstriped the headstock and left the body the way it is. You should pinstripe the body too!

[HELLonWHEELS]

I don't want to re-finish the body, but what i could do is pinstripe the pick-guard with black. hmmmmm

[Trevo]

I like it.

I would suggest not to pinstripe it unless you do it to the rest of the body.

[HELLonWHEELS]

What about something like this.

http://i19.photobucket.com/albums/b160/HELLonWHEELS7/untitled-4.jpg

[Trevo]

That would be cool. Would you do it all the way around?
Are you going to write anything on it?

[HELLonWHEELS]

I ended up doing what i drew. Ill take pics of it later. It went with the less is more attitude. I can always get a sticker made when im done.

[HELLonWHEELS]

Here are pics

http://i147.photobucket.com/albums/r305/ToyotaMatrixXR/Toyota%20Matrix%20XR/DSCN0500.jpg

[CCR90]

I quite like that. That would also look very pwn if you could do it by hand and do it in blue and red just like the old hotrods.