PDA

View Full Version : Anyone want to walk me thru setting my compressor up?

Naveed Afzal
10-23-2006, 06:39 PM
Im on AIM right now

God and Groove

im using a BBE MAXcom
Left Shoe
10-23-2006, 06:58 PM
you still want trb?
Naveed Afzal
10-23-2006, 07:15 PM
Yes!!!!
Left Shoe
10-23-2006, 07:17 PM
when can you come get it?
Naveed Afzal
10-23-2006, 07:27 PM
Tommorow!

nah... i dont know lol... wheres your exact location.
Left Shoe
10-23-2006, 10:28 PM
http://img77.imageshack.us/img77/1912/shoeshousetp0.jpg
thelowsoundofbass
10-23-2006, 11:23 PM
http://img77.imageshack.us/img77/1912/shoeshousetp0.jpg

I just realized how close you live to me. About a 3-4 hour drive.

lowsound
Spaceman Spiff
10-23-2006, 11:43 PM
Probably more than that, Justin. I mean, London is a couple hours from Toronto, so I'm pretty sure it would be a few more hours than 3 or 4.
thelowsoundofbass
10-24-2006, 12:58 PM
Probably more than that, Justin. I mean, London is a couple hours from Toronto, so I'm pretty sure it would be a few more hours than 3 or 4.

Well I guess that it is four hours to columbus, so maybe five hours to LS's.

lowsound
edgebass5
10-24-2006, 02:27 PM
Here's the setup for your BBE MaxCom

Input signal -> Channel 1 input
Channel 1 output -> Channel 2 input
Channel 2 output -> Next device in your signal chain

Quote:
Originally Posted by Planet Boulder @ talkbass.com
Both channels are on and the link is set to off. The settings for each channel are as follows:

Channel 1:
Gate Threshold = off
Channel = on
Threshold = -10
Ratio = 4 (or just under 5, technically)
Attack = 10
Auto = off
Release = .2
Output - 1
Sonic Max = off

Channel 2:
Gate Threshold = off
Channel = on
Threshold = 0
Ratio = 7
Attack = .1
Auto = off
Release = .5
Output - 7
Sonic Max = on (Low = 5; Process = 7)
edgebass5
10-24-2006, 02:29 PM
That's just a suggested setting I found on talkbass. I used to use something similar on my DBX 166XL.