PDA

View Full Version : DESTROYED (than salvaged)

The Feeding
03-04-2006, 09:43 AM
so i got a 6 inch Holz for my bass drum, i proceeded to take the head off, clean it, and take an X-acto knife and tried to use the Holz as a diagram. Only problem is i was tracing the wrong side...... so it almost worked until i realized it wasn't going to snap on the other side, so i had to cut more... in the process above the hole it started to tear away. Eventually i got it snapped together but it was loose as hell and i KNEW it was going to rattle off, so i got out my trusty duct tape, taped the back to my head and put it back on my bass. LOOKS SURPRISINGLY GOOD, it's chrome and i'll put some pics up, the only noticable thing is the small tear line above it. FROM THE INSIDE, it's a different story, oblong hole and duct taped, very ghetto. But it looks good from the front and stays in place perfectly!
Tim
03-04-2006, 09:44 AM
ummm. ok?
Jezen
03-04-2006, 09:52 AM
Wow. That's terrific?
440561
03-04-2006, 09:55 AM
Pics? From the front and inside...
Panopticon
03-04-2006, 10:30 AM
it's not that hard to follow the diagram on the holz package...

http://i23.photobucket.com/albums/b379/enemytopublic/4fc70eb8.jpg
Chippy569
03-04-2006, 03:15 PM
it's not that hard to follow the diagram on the holz package...

http://i23.photobucket.com/albums/b379/enemytopublic/4fc70eb8.jpg
you know, some acetone would take that ugly remo logo off real well...
Drum Phil
03-04-2006, 03:16 PM
:lol:

Evans > Remo
Chippy569
03-04-2006, 03:17 PM
acetone takes all silkscreened logos off... evans, remo, aquarian, attack.
Loyton
03-04-2006, 03:20 PM
acetone takes all silkscreened logos off... evans, remo, aquarian, attack.


I think Ill do that with all my heads once I get in my coated babes on my saturns, I just think logos hamper looks period. Espically on coated.

Thanks for the tip:wave:
Chippy569
03-04-2006, 03:22 PM
i've never tried it on a coated head, be careful. it might take the coating with it x.x
Loyton
03-04-2006, 03:28 PM
i've never tried it on a coated head, be careful. it might take the coating with it x.x

Ive got some old coated that I can try it on.
Chippy569
03-04-2006, 03:31 PM
there 'ya go!

let me know how it comes out.
Chester
03-04-2006, 08:20 PM
hmm, that would be interesting to take the logos off, i think it would look a lot better.
Panopticon
03-04-2006, 08:48 PM
:lol:

Evans > Remo


yeah i usually use Evans. I was gonna get a G1 but they didnt have any...so i just got an amb...first and only remo head i have/will ever own...
Zildjian
03-05-2006, 08:19 AM
u really dont need all those pillows in that bass drum..
ant_182
03-05-2006, 10:15 AM
u really dont need all those pillows in that bass drum..

agreed. I have one in mine and thats plenty! and its with a stock head, I'm getting my PS3 soon, then I porbable wont use any :)
fishbulb'
03-05-2006, 10:48 AM
:lol:

Remo > Evans
I know. I was thinking the same thing.
aznriceball
03-05-2006, 02:53 PM
you know, some acetone would take that ugly remo logo off real well...

what do you need the port for?

1. for looks, well...
2. for focus..eh
3. for recording..oh yeah :thumb:
aznriceball
03-05-2006, 02:54 PM
it's not that hard to follow the diagram on the holz package...

http://i23.photobucket.com/albums/b379/enemytopublic/4fc70eb8.jpg

the port is for what? i assume not for looks or focus, so it must be for recording :thumb: