PDA

View Full Version : New amp. Help!


cr4ck
12-18-2005, 10:48 AM
Okay, yesterday I just bought a new head and a new box. The head is a Ashdown ABM 500 EVO II, the Box is a Hughes&Kettner Quantum QS 2115 PRO.
It was necessary to bought this things, ‘cause in the rehearsal room I didn’t hear me.
(Before I played an Peavey Max 450 and the Cab was a Peavey 115BVX BW 8 ohm.)

I play an Ibanez SR505 which is an activ bass. So now I’ve the problem that I have very good lows but the high notes I don’t hear anymore.
I haven’t changed the battery in the Ibanez Bass since I bought it (9 months ago, or so…). Can that be the reason? Or how can I get a better sound of the highnotes whit this Amp? Or is it just the Amp?

Ah yes, sry for my bad english ;-)

Cheers.

Liebensaft
12-18-2005, 11:03 AM
Adjust the knobs on your bass. Adjust the EQ's on the head. Raise the treble and mids, and lower the bass.

Replace the battery too, it costs $3.

Killer Fridge
12-18-2005, 12:38 PM
its probably the 2x15s thats causing you the problem - they will play the low end really well, but they wont handle the highs fantasticaly - buy a 2x10 to add to it (or do some other things that the other guy said)

cr4ck
12-18-2005, 01:46 PM
I don't have 2x15s ;-) I've 2x10s... But do you really think the cab is the reason?
Have the Ashdown Heads speaker protections?

kilian
12-18-2005, 01:50 PM
No I don't think it is.

The Peavey amp has a bit more treble in it's character and the Ashdown is a warmer amp (with more lows, a bit scooped highs and therefore sounding smooth).

Replace the battery and then check again. I think that's it. And boost the highs a bit if you don't hear them.

FunkMetalBass
12-18-2005, 01:51 PM
It's from the fundamentals of physics. The bigger the speaker, the lower the frequencies that can be put out clearer. Pushing out the higher frequencies forces more work upon a bigger speaker than it does a smaller speaker. It's not a big problem, it can be fixed with just turning down the bass a little and raising the mids and treble on the head.

FunkMetalBass
12-18-2005, 01:53 PM
That cab is nice, btw. 2x10s ans 1x15 all in one? Nice.

Killer Fridge
12-18-2005, 01:57 PM
apologies, im a retard, read 2115 and assumed it was a 2x15 - i have learnt not to assume :(

FunkMetalBass
12-18-2005, 02:05 PM
apologies, im a retard, read 2115 and assumed it was a 2x15 - i have learnt not to assume :(

Yeah when I saw that, i was like, "Holy sh*t! 2x15?! That's HUGE..."

kilian
12-18-2005, 02:11 PM
It's from the fundamentals of physics. The bigger the speaker, the lower the frequencies that can be put out clearer. Pushing out the higher frequencies forces more work upon a bigger speaker than it does a smaller speaker. It's not a big problem, it can be fixed with just turning down the bass a little and raising the mids and treble on the head.
I know a 15" cabinet which kills a 210 cabinet in the highs. WITHOUT a tweater.. :rolleyes:


Peavey BW 15" vs an ampeg classic 210. Then the peavey is the winner.. :p So what you say there doesn't work always, but is a nice indication ;)

Liebensaft
12-18-2005, 03:30 PM
(or do some other things that the other guy said)
Hi, I'm Joe.:wave:

Mr. Pickle
12-18-2005, 05:49 PM
grammar police! PULL OVER!

i think buying just 15's was a mistake. it's something i'd never do anyway, not w/o a 10 or a 12 with it.